dmesg - 2013-03-04 21:00
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 3.5.0-17-generic (buildd@roseapple) (gcc version 4.7.2 (Ubuntu/Linaro 4.7.2-2ubuntu1) ) #28-Ubuntu SMP Tue Oct 9 19:32:08 UTC 2012 (Ubuntu 3.5.0-17.28-generic 3.5.5)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
NSC Geode by NSC
Cyrix CyrixInstead
Centaur CentaurHauls
Transmeta GenuineTMx86
Transmeta TransmetaCPU
UMC UMC UMC UMC
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable
BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000bfe8ffff] usable
BIOS-e820: [mem 0x00000000bfe90000-0x00000000bfee2fff] ACPI NVS
BIOS-e820: [mem 0x00000000bfee3000-0x00000000bfeeffff] ACPI data
BIOS-e820: [mem 0x00000000bfef0000-0x00000000bfefffff] reserved
BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved
NX (Execute Disable) protection: active
DMI 2.5 present.
DMI: Dell Inc. Inspiron 530/0RY007, BIOS 1.0.5 09/14/2007
e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0xbfe90 max_arch_pfn = 0x1000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CEFFF write-protect
CF000-EFFFF uncachable
F0000-FFFFF write-through
MTRR variable ranges enabled:
0 base 000000000 mask F80000000 write-back
1 base 080000000 mask FC0000000 write-back
2 base 0BFF00000 mask FFFF00000 uncachable
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
original variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 1GB, type WB
reg 2, base: 3071MB, range: 1MB, type UC
total RAM covered: 3071M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 2M num_reg: 3 lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 1GB, type WB
reg 2, base: 3071MB, range: 1MB, type UC
found SMP MP-table at [mem 0x000f3ee0-0x000f3eef] mapped at [c00f3ee0]
initial memory mapped: [mem 0x00000000-0x01ffffff]
Base memory trampoline at [c009a000] 9a000 size 16384
init_memory_mapping: [mem 0x00000000-0x37bfdfff]
[mem 0x00000000-0x001fffff] page 4k
[mem 0x00200000-0x379fffff] page 2M
[mem 0x37a00000-0x37bfdfff] page 4k
kernel direct mapping tables up to 0x37bfdfff @ [mem 0x01ffa000-0x01ffffff]
RAMDISK: [mem 0x35780000-0x36bb7fff]
ACPI: RSDP 000f9780 00024 (v02 DELL )
ACPI: XSDT bfee3080 0005C (v01 DELL FX09 42302E31 AWRD 00000000)
ACPI: FACP bfee7200 000F4 (v03 DELL FX09 42302E31 AWRD 00000000)
ACPI: DSDT bfee3200 03FFC (v01 DELL AWRDACPI 00001000 MSFT 03000000)
ACPI: FACS bfe90000 00040
ACPI: HPET bfee73c0 00038 (v01 DELL FX09 42302E31 AWRD 00000098)
ACPI: MCFG bfee7400 0003C (v01 DELL FX09 42302E31 AWRD 00000000)
ACPI: SLIC bfee7440 00176 (v01 DELL FX09 42302E31 AWRD 00000000)
ACPI: DMY2 bfee75c0 00080 (v01 DELL FX09 42302E31 AWRD 00000000)
ACPI: APIC bfee7300 00084 (v01 DELL FX09 42302E31 AWRD 00000000)
ACPI: SSDT bfee7ca0 00380 (v01 PmRef CpuPm 00003000 INTL 20041203)
ACPI: Local APIC address 0xfee00000
2178MB HIGHMEM available.
891MB LOWMEM available.
mapped low ram: 0 - 37bfe000
low ram: 0 - 37bfe000
Zone ranges:
DMA [mem 0x00010000-0x00ffffff]
Normal [mem 0x01000000-0x37bfdfff]
HighMem [mem 0x37bfe000-0xbfe8ffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00010000-0x0009dfff]
node 0: [mem 0x00100000-0xbfe8ffff]
On node 0 totalpages: 785950
free_area_init_node: node 0, pgdat c18a0840, node_mem_map f3f80200
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3950 pages, LIFO batch:0
Normal zone: 1752 pages used for memmap
Normal zone: 222502 pages, LIFO batch:31
HighMem zone: 4358 pages used for memmap
HighMem zone: 553356 pages, LIFO batch:31
Using APIC driver default
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
SMP: Allowing 4 CPUs, 2 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: 000000000009e000 - 000000000009f000
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
e820: [mem 0xbff00000-0xdfffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 14 pages/cpu @f7bb3000 s34176 r0 d23168 u57344
pcpu-alloc: s34176 r0 d23168 u57344 alloc=14*4096
pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 779808
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
__ex_table already sorted, skipping sort
Initializing CPU#0
allocated 6288384 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
Initializing HighMem for node 0 (00037bfe:000bfe90)
Memory: 3080668k/3144256k available (5956k kernel code, 63132k reserved, 2928k data, 756k init, 2230856k highmem)
virtual kernel memory layout:
fixmap : 0xfff15000 - 0xfffff000 ( 936 kB)
pkmap : 0xffc00000 - 0xffe00000 (2048 kB)
vmalloc : 0xf83fe000 - 0xffbfe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf7bfe000 ( 891 MB)
.init : 0xc18ae000 - 0xc196b000 ( 756 kB)
.data : 0xc15d1358 - 0xc18ad6c0 (2928 kB)
.text : 0xc1000000 - 0xc15d1358 (5956 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
NR_IRQS:2304 nr_irqs:712 16
CPU 0 irqstacks, hard=f700a000 soft=f700c000
vt handoff: transparent VT on vt#7
Console: colour dummy device 80x25
console [tty0] enabled
hpet clockevent registered
Fast TSC calibration using PIT
Detected 2194.239 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 4388.47 BogoMIPS (lpj=8776956)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Mount-cache hash table entries: 512
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
CPU0: Thermal monitoring enabled (TM2)
using mwait in idle threads.
ACPI: Core revision 20120320
ftrace: allocating 24585 entries in 49 pages
Enabling APIC mode: Flat. Using 1 I/O APICs
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Core(TM)2 Duo CPU E4500 @ 2.20GHz stepping 0d
Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver.
PEBS disabled due to CPU errata.
... version: 2
... bit width: 40
... generic registers: 2
... value mask: 000000ffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 0000000700000003
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
CPU 1 irqstacks, hard=f7106000 soft=f7110000
Initializing CPU#1
Booting Node 0, Processors #1
Brought up 2 CPUs
Total of 2 processors activated (8776.95 BogoMIPS).
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.capability
PM: Registering ACPI NVS region [mem 0xbfe90000-0xbfee2fff] (339968 bytes)
dummy:
RTC time: 12:50:13, date: 02/18/13
NET: Registered protocol family 16
Trying to unpack rootfs image as initramfs...
EISA bus registered
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using MMCONFIG for extended config space
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
ACPI: SSDT bfee7680 0026C (v01 PmRef Cpu0Ist 00003000 INTL 20041203)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 0026C (v01 PmRef Cpu0Ist 00003000 INTL 20041203)
ACPI: SSDT bfee7b40 00152 (v01 PmRef Cpu1Ist 00003000 INTL 20041203)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00152 (v01 PmRef Cpu1Ist 00003000 INTL 20041203)
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
pci_root PNP0A08:00: >host bridge window [io 0x0000-0x0cf7] (ignored)
pci_root PNP0A08:00: >host bridge window [io 0x0d00-0xffff] (ignored)
pci_root PNP0A08:00: >host bridge window [mem 0x000a0000-0x000bffff] (ignored)
pci_root PNP0A08:00: >host bridge window [mem 0x000c0000-0x000dffff] (ignored)
pci_root PNP0A08:00: >host bridge window [mem 0xbff00000-0xfebfffff] (ignored)
PCI: root bus 00: using default resources
PCI host bridge to bus 0000:00
pci_bus 0000:00: >root bus resource [io 0x0000-0xffff]
pci_bus 0000:00: >root bus resource [mem 0x00000000-0xfffffffff]
pci 0000:00:00.0: >[8086:29c0] type 00 class 0x060000
pci 0000:00:01.0: >[8086:29c1] type 01 class 0x060400
pci 0000:00:01.0: >PME# supported from D0 D3hot D3cold
pci 0000:00:19.0: >[8086:10c0] type 00 class 0x020000
pci 0000:00:19.0: >reg 10: [mem 0xfdfc0000-0xfdfdffff]
pci 0000:00:19.0: >reg 14: [mem 0xfdfff000-0xfdffffff]
pci 0000:00:19.0: >reg 18: [io 0xff00-0xff1f]
pci 0000:00:19.0: >PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: >[8086:2937] type 00 class 0x0c0300
pci 0000:00:1a.0: >reg 20: [io 0xfe00-0xfe1f]
pci 0000:00:1a.1: >[8086:2938] type 00 class 0x0c0300
pci 0000:00:1a.1: >reg 20: [io 0xfd00-0xfd1f]
pci 0000:00:1a.2: >[8086:2939] type 00 class 0x0c0300
pci 0000:00:1a.2: >reg 20: [io 0xfc00-0xfc1f]
pci 0000:00:1a.7: >[8086:293c] type 00 class 0x0c0320
pci 0000:00:1a.7: >reg 10: [mem 0xfdffe000-0xfdffe3ff]
pci 0000:00:1a.7: >PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: >[8086:293e] type 00 class 0x040300
pci 0000:00:1b.0: >reg 10: [mem 0xfdff4000-0xfdff7fff 64bit]
pci 0000:00:1b.0: >PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: >[8086:2934] type 00 class 0x0c0300
pci 0000:00:1d.0: >reg 20: [io 0xfb00-0xfb1f]
pci 0000:00:1d.1: >[8086:2935] type 00 class 0x0c0300
pci 0000:00:1d.1: >reg 20: [io 0xfa00-0xfa1f]
pci 0000:00:1d.2: >[8086:2936] type 00 class 0x0c0300
pci 0000:00:1d.2: >reg 20: [io 0xf900-0xf91f]
pci 0000:00:1d.7: >[8086:293a] type 00 class 0x0c0320
pci 0000:00:1d.7: >reg 10: [mem 0xfdffd000-0xfdffd3ff]
pci 0000:00:1d.7: >PME# supported from D0 D3hot D3cold
pci 0000:00:1e.0: >[8086:244e] type 01 class 0x060401
pci 0000:00:1f.0: >[8086:2916] type 00 class 0x060100
pci 0000:00:1f.0: >ICH7 LPC Generic IO decode 1 PIO at 0800 (mask 003f)
pci 0000:00:1f.0: >ICH7 LPC Generic IO decode 2 PIO at 0290 (mask 003f)
pci 0000:00:1f.2: >[8086:2920] type 00 class 0x01018f
pci 0000:00:1f.2: >reg 10: [io 0xf800-0xf807]
pci 0000:00:1f.2: >reg 14: [io 0xf700-0xf703]
pci 0000:00:1f.2: >reg 18: [io 0xf600-0xf607]
pci 0000:00:1f.2: >reg 1c: [io 0xf500-0xf503]
pci 0000:00:1f.2: >reg 20: [io 0xf400-0xf40f]
pci 0000:00:1f.2: >reg 24: [io 0xf300-0xf30f]
pci 0000:00:1f.3: >[8086:2930] type 00 class 0x0c0500
pci 0000:00:1f.3: >reg 10: [mem 0xfdffc000-0xfdffc0ff 64bit]
pci 0000:00:1f.3: >reg 20: [io 0x0500-0x051f]
pci 0000:00:1f.5: >[8086:2926] type 00 class 0x010185
pci 0000:00:1f.5: >reg 10: [io 0xf100-0xf107]
pci 0000:00:1f.5: >reg 14: [io 0xf000-0xf003]
pci 0000:00:1f.5: >reg 18: [io 0xef00-0xef07]
pci 0000:00:1f.5: >reg 1c: [io 0xee00-0xee03]
pci 0000:00:1f.5: >reg 20: [io 0xed00-0xed0f]
pci 0000:00:1f.5: >reg 24: [io 0xec00-0xec0f]
pci 0000:01:00.0: >[1002:9498] type 00 class 0x030000
pci 0000:01:00.0: >reg 10: [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:01:00.0: >reg 18: [mem 0xfdde0000-0xfddeffff 64bit]
pci 0000:01:00.0: >reg 20: [io 0xce00-0xceff]
pci 0000:01:00.0: >reg 30: [mem 0x00000000-0x0001ffff pref]
pci 0000:01:00.0: >supports D1 D2
pci 0000:01:00.1: >[1002:aa38] type 00 class 0x040300
pci 0000:01:00.1: >reg 10: [mem 0xfddfc000-0xfddfffff 64bit]
pci 0000:01:00.1: >supports D1 D2
pci 0000:00:01.0: >PCI bridge to [bus 01-01]
pci 0000:00:01.0: > bridge window [io 0xc000-0xcfff]
pci 0000:00:01.0: > bridge window [mem 0xfdd00000-0xfddfffff]
pci 0000:00:01.0: > bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:1e.0: >PCI bridge to [bus 02-02] (subtractive decode)
pci 0000:00:1e.0: > bridge window [io 0xd000-0xdfff]
pci 0000:00:1e.0: > bridge window [mem 0xfdc00000-0xfdcfffff]
pci 0000:00:1e.0: > bridge window [mem 0xfde00000-0xfdefffff 64bit pref]
pci 0000:00:1e.0: > bridge window [io 0x0000-0xffff] (subtractive decode)
pci 0000:00:1e.0: > bridge window [mem 0x00000000-0xfffffffff] (subtractive decode)
pci_bus 0000:00: >on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
pci0000:00: >Requesting ACPI _OSC control (0x1d)
pci0000:00: >ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
ACPI _OSC control for PCIe not granted, disabling ASPM
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNK0] (IRQs 3 *4 5 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 *9 10 11 12 14 15)
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type usb registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff]
e820: reserve RAM buffer [mem 0xbfe90000-0xbfffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
HPET: 4 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
hpet0: 4 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: >[bus 00-ff]
pnp 00:00: >[io 0x0cf8-0x0cff]
pnp 00:00: >[io 0x0000-0x0cf7 window]
pnp 00:00: >[io 0x0d00-0xffff window]
pnp 00:00: >[mem 0x000a0000-0x000bffff window]
pnp 00:00: >[mem 0x000c0000-0x000dffff window]
pnp 00:00: >[mem 0xbff00000-0xfebfffff window]
pnp 00:00: >Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
pnp 00:01: >[io 0x0010-0x001f]
pnp 00:01: >[io 0x0022-0x003f]
pnp 00:01: >[io 0x0044-0x005f]
pnp 00:01: >[io 0x0060]
pnp 00:01: >[io 0x0064]
pnp 00:01: >[io 0x0062-0x0063]
pnp 00:01: >[io 0x0065-0x006f]
pnp 00:01: >[io 0x0074-0x007f]
pnp 00:01: >[io 0x0091-0x0093]
pnp 00:01: >[io 0x00a2-0x00bf]
pnp 00:01: >[io 0x00e0-0x00ef]
pnp 00:01: >[io 0x04d0-0x04d1]
pnp 00:01: >[io 0x0800-0x087f]
pnp 00:01: >[io 0x0290-0x0297]
pnp 00:01: >[io 0x0880-0x088f]
system 00:01: >[io 0x04d0-0x04d1] has been reserved
system 00:01: >[io 0x0800-0x087f] has been reserved
system 00:01: >[io 0x0290-0x0297] has been reserved
system 00:01: >[io 0x0880-0x088f] has been reserved
system 00:01: >Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: >[dma 4]
pnp 00:02: >[io 0x0000-0x000f]
pnp 00:02: >[io 0x0080-0x0090]
pnp 00:02: >[io 0x0094-0x009f]
pnp 00:02: >[io 0x00c0-0x00df]
pnp 00:02: >Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:03: >[irq 0 disabled]
pnp 00:03: >[irq 8]
pnp 00:03: >[mem 0xfed00000-0xfed003ff]
pnp 00:03: >Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:04: >[io 0x0070-0x0073]
pnp 00:04: >Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:05: >[io 0x0061]
pnp 00:05: >Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:06: >[io 0x00f0-0x00ff]
pnp 00:06: >[irq 13]
pnp 00:06: >Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:07: >[io 0x03f0-0x03f5]
pnp 00:07: >[io 0x03f7]
pnp 00:07: >[irq 6]
pnp 00:07: >[dma 2]
pnp 00:07: >Plug and Play ACPI device, IDs PNP0700 (active)
pnp 00:08: >[io 0x0400-0x04bf]
system 00:08: >[io 0x0400-0x04bf] has been reserved
system 00:08: >Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:09: >[mem 0xffb80000-0xffbfffff]
pnp 00:09: >Plug and Play ACPI device, IDs INT0800 (active)
pnp 00:0a: >[mem 0xe0000000-0xefffffff]
system 00:0a: >[mem 0xe0000000-0xefffffff] has been reserved
system 00:0a: >Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0b: >[mem 0x000f0000-0x000fffff]
pnp 00:0b: >[mem 0xbff00000-0xbfffffff]
pnp 00:0b: >[mem 0xfed00000-0xfed000ff]
pnp 00:0b: >[mem 0xbfe90000-0xbfefffff]
pnp 00:0b: >[mem 0x00000000-0x0009ffff]
pnp 00:0b: >[mem 0x00100000-0xbfe8ffff]
pnp 00:0b: >[mem 0xfec00000-0xfec00fff]
pnp 00:0b: >[mem 0xfed14000-0xfed1dfff]
pnp 00:0b: >[mem 0xfed20000-0xfed9ffff]
pnp 00:0b: >[mem 0xfee00000-0xfee00fff]
pnp 00:0b: >[mem 0xffb00000-0xffb7ffff]
pnp 00:0b: >[mem 0xfff00000-0xffffffff]
pnp 00:0b: >[mem 0x000e0000-0x000effff]
system 00:0b: >[mem 0x000f0000-0x000fffff] could not be reserved
system 00:0b: >[mem 0xbff00000-0xbfffffff] could not be reserved
system 00:0b: >[mem 0xfed00000-0xfed000ff] has been reserved
system 00:0b: >[mem 0xbfe90000-0xbfefffff] could not be reserved
system 00:0b: >[mem 0x00000000-0x0009ffff] could not be reserved
system 00:0b: >[mem 0x00100000-0xbfe8ffff] could not be reserved
system 00:0b: >[mem 0xfec00000-0xfec00fff] could not be reserved
system 00:0b: >[mem 0xfed14000-0xfed1dfff] has been reserved
system 00:0b: >[mem 0xfed20000-0xfed9ffff] has been reserved
system 00:0b: >[mem 0xfee00000-0xfee00fff] has been reserved
system 00:0b: >[mem 0xffb00000-0xffb7ffff] has been reserved
system 00:0b: >[mem 0xfff00000-0xffffffff] has been reserved
system 00:0b: >[mem 0x000e0000-0x000effff] has been reserved
system 00:0b: >Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 12 devices
ACPI: ACPI bus type pnp unregistered
PnPBIOS: Disabled by ACPI PNP
pci 0000:01:00.0: >BAR 6: assigned [mem 0xfdd00000-0xfdd1ffff pref]
pci 0000:00:01.0: >PCI bridge to [bus 01-01]
pci 0000:00:01.0: > bridge window [io 0xc000-0xcfff]
pci 0000:00:01.0: > bridge window [mem 0xfdd00000-0xfddfffff]
pci 0000:00:01.0: > bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:1e.0: >PCI bridge to [bus 02-02]
pci 0000:00:1e.0: > bridge window [io 0xd000-0xdfff]
pci 0000:00:1e.0: > bridge window [mem 0xfdc00000-0xfdcfffff]
pci 0000:00:1e.0: > bridge window [mem 0xfde00000-0xfdefffff 64bit pref]
pci 0000:00:1e.0: >setting latency timer to 64
pci_bus 0000:00: >resource 4 [io 0x0000-0xffff]
pci_bus 0000:00: >resource 5 [mem 0x00000000-0xfffffffff]
pci_bus 0000:01: >resource 0 [io 0xc000-0xcfff]
pci_bus 0000:01: >resource 1 [mem 0xfdd00000-0xfddfffff]
pci_bus 0000:01: >resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
pci_bus 0000:02: >resource 0 [io 0xd000-0xdfff]
pci_bus 0000:02: >resource 1 [mem 0xfdc00000-0xfdcfffff]
pci_bus 0000:02: >resource 2 [mem 0xfde00000-0xfdefffff 64bit pref]
pci_bus 0000:02: >resource 4 [io 0x0000-0xffff]
pci_bus 0000:02: >resource 5 [mem 0x00000000-0xfffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP: reno registered
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: >Boot video device
PCI: CLS 64 bytes, default 64
audit: initializing netlink socket (disabled)
type=2000 audit(1361191813.168:1): initialized
highmem bounce pool size: 64 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
fuse init (API version 7.19)
msgmni has been set to 1659
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pcieport 0000:00:01.0: >irq 40 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
intel_idle: does not run on family 6 model 15
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ACPI: Fan [FAN] (on)
ACPI: Requesting acpi_cpufreq
Freeing initrd memory: 20704k freed
thermal LNXTHERM:00: >registered as thermal_zone0
ACPI: Thermal Zone [THRM] (40 C)
GHES: HEST is not enabled!
isapnp: Scanning for PnP cards...
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
ata_piix 0000:00:1f.2: >version 2.13
ata_piix 0000:00:1f.2: >MAP [
P0 P2 P1 P3 ]
ata_piix 0000:00:1f.2: >setting latency timer to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: SATA max UDMA/133 cmd 0xf800 ctl 0xf700 bmdma 0xf400 irq 19
ata2: SATA max UDMA/133 cmd 0xf600 ctl 0xf500 bmdma 0xf408 irq 19
ata_piix 0000:00:1f.5: >MAP [
P0 -- P1 -- ]
ata_piix 0000:00:1f.5: >setting latency timer to 64
scsi2 : ata_piix
scsi3 : ata_piix
ata3: SATA max UDMA/133 cmd 0xf100 ctl 0xf000 bmdma 0xed00 irq 19
ata4: SATA max UDMA/133 cmd 0xef00 ctl 0xee00 bmdma 0xed08 irq 19
Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1a.7: >setting latency timer to 64
ehci_hcd 0000:00:1a.7: >EHCI Host Controller
ehci_hcd 0000:00:1a.7: >new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.7: >cache line size of 64 is not supported
ehci_hcd 0000:00:1a.7: >irq 18, io mem 0xfdffe000
ehci_hcd 0000:00:1a.7: >USB 2.0 started, EHCI 1.00
usb usb1: >New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: >Product: EHCI Host Controller
usb usb1: >Manufacturer: Linux 3.5.0-17-generic ehci_hcd
usb usb1: >SerialNumber: 0000:00:1a.7
hub 1-0:1.0: >USB hub found
hub 1-0:1.0: >6 ports detected
ehci_hcd 0000:00:1d.7: >setting latency timer to 64
ehci_hcd 0000:00:1d.7: >EHCI Host Controller
ehci_hcd 0000:00:1d.7: >new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.7: >cache line size of 64 is not supported
ehci_hcd 0000:00:1d.7: >irq 23, io mem 0xfdffd000
ehci_hcd 0000:00:1d.7: >USB 2.0 started, EHCI 1.00
usb usb2: >New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: >Product: EHCI Host Controller
usb usb2: >Manufacturer: Linux 3.5.0-17-generic ehci_hcd
usb usb2: >SerialNumber: 0000:00:1d.7
hub 2-0:1.0: >USB hub found
hub 2-0:1.0: >6 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1a.0: >setting latency timer to 64
uhci_hcd 0000:00:1a.0: >UHCI Host Controller
uhci_hcd 0000:00:1a.0: >new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: >irq 16, io base 0x0000fe00
usb usb3: >New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: >Product: UHCI Host Controller
usb usb3: >Manufacturer: Linux 3.5.0-17-generic uhci_hcd
usb usb3: >SerialNumber: 0000:00:1a.0
hub 3-0:1.0: >USB hub found
hub 3-0:1.0: >2 ports detected
uhci_hcd 0000:00:1a.1: >setting latency timer to 64
uhci_hcd 0000:00:1a.1: >UHCI Host Controller
uhci_hcd 0000:00:1a.1: >new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: >irq 21, io base 0x0000fd00
usb usb4: >New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: >Product: UHCI Host Controller
usb usb4: >Manufacturer: Linux 3.5.0-17-generic uhci_hcd
usb usb4: >SerialNumber: 0000:00:1a.1
hub 4-0:1.0: >USB hub found
hub 4-0:1.0: >2 ports detected
uhci_hcd 0000:00:1a.2: >setting latency timer to 64
uhci_hcd 0000:00:1a.2: >UHCI Host Controller
uhci_hcd 0000:00:1a.2: >new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1a.2: >irq 19, io base 0x0000fc00
usb usb5: >New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: >Product: UHCI Host Controller
usb usb5: >Manufacturer: Linux 3.5.0-17-generic uhci_hcd
usb usb5: >SerialNumber: 0000:00:1a.2
hub 5-0:1.0: >USB hub found
hub 5-0:1.0: >2 ports detected
uhci_hcd 0000:00:1d.0: >setting latency timer to 64
uhci_hcd 0000:00:1d.0: >UHCI Host Controller
uhci_hcd 0000:00:1d.0: >new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.0: >irq 23, io base 0x0000fb00
usb usb6: >New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: >Product: UHCI Host Controller
usb usb6: >Manufacturer: Linux 3.5.0-17-generic uhci_hcd
usb usb6: >SerialNumber: 0000:00:1d.0
hub 6-0:1.0: >USB hub found
hub 6-0:1.0: >2 ports detected
uhci_hcd 0000:00:1d.1: >setting latency timer to 64
uhci_hcd 0000:00:1d.1: >UHCI Host Controller
uhci_hcd 0000:00:1d.1: >new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.1: >irq 19, io base 0x0000fa00
usb usb7: >New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: >Product: UHCI Host Controller
usb usb7: >Manufacturer: Linux 3.5.0-17-generic uhci_hcd
usb usb7: >SerialNumber: 0000:00:1d.1
hub 7-0:1.0: >USB hub found
hub 7-0:1.0: >2 ports detected
uhci_hcd 0000:00:1d.2: >setting latency timer to 64
uhci_hcd 0000:00:1d.2: >UHCI Host Controller
uhci_hcd 0000:00:1d.2: >new USB bus registered, assigned bus number 8
uhci_hcd 0000:00:1d.2: >irq 18, io base 0x0000f900
usb usb8: >New USB device found, idVendor=1d6b, idProduct=0001
usb usb8: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: >Product: UHCI Host Controller
usb usb8: >Manufacturer: Linux 3.5.0-17-generic uhci_hcd
usb usb8: >SerialNumber: 0000:00:1d.2
hub 8-0:1.0: >USB hub found
hub 8-0:1.0: >2 ports detected
usbcore: registered new interface driver libusual
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:04: >RTC can wake from S4
rtc_cmos 00:04: >rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
EISA: Probing bus 0 at eisa.0
EISA: Detected 0 cards.
cpuidle: using governor ladder
cpuidle: using governor menu
EFI Variables Facility v0.08 2004-May-17
ashmem: initialized
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Using IPI No-Shortcut mode
PM: Hibernation image not present or could not be loaded.
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
Magic number: 1:387:835
rtc_cmos 00:04: >setting system clock to 2013-02-18 12:50:14 UTC (1361191814)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
ata3: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
usb 1-3: >new high-speed USB device number 2 using ehci_hcd
isapnp: No Plug & Play device found
usb 1-3: >New USB device found, idVendor=0424, idProduct=2524
usb 1-3: >New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-3:1.0: >USB hub found
hub 1-3:1.0: >4 ports detected
usb 2-5: >new high-speed USB device number 2 using ehci_hcd
Refined TSC clocksource calibration: 2194.499 MHz.
Switching to clocksource tsc
usb 2-5: >New USB device found, idVendor=0644, idProduct=0200
usb 2-5: >New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-5: >Product: CA-200
usb 2-5: >Manufacturer: TEAC
usb 2-5: >SerialNumber: 000001131586
Initializing USB Mass Storage driver...
scsi4 : usb-storage 2-5:1.0
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.01: SATA link down (SStatus 0 SControl 300)
ata2.01: link offline, clearing class 3 to NONE
ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.01: SATA link down (SStatus 0 SControl 300)
ata2.00: ATAPI: TSSTcorp CD-RW/DVD-ROM TS-H493B, D200, max UDMA/33
ata1.00: ATA-8: ST3500418AS, CC35, max UDMA/133
ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata2.00: configured for UDMA/33
ata1.00: configured for UDMA/133
scsi 0:0:0:0: >Direct-Access ATA ST3500418AS CC35 PQ: 0 ANSI: 5
sd 0:0:0:0: >[sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 0:0:0:0: >Attached scsi generic sg0 type 0
sd 0:0:0:0: >[sda] Write Protect is off
sd 0:0:0:0: >[sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: >[sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
usb 1-3.2: >new low-speed USB device number 3 using ehci_hcd
sda: sda1 sda2 < sda5 >
sd 0:0:0:0: >[sda] Attached SCSI disk
scsi 1:0:0:0: >CD-ROM TSSTcorp CDRWDVD TS-H493B D200 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 8x/48x writer cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: >Attached scsi CD-ROM sr0
sr 1:0:0:0: >Attached scsi generic sg1 type 5
Freeing unused kernel memory: 756k freed
Write protecting the kernel text: 5960k
Write protecting the kernel read-only data: 2424k
NX-protecting the kernel data: 4280k
udevd[106]: starting version 175
e1000e: Intel(R) PRO/1000 Network Driver - 2.0.0-k
e1000e: Copyright(c) 1999 - 2012 Intel Corporation.
e1000e 0000:00:19.0: >setting latency timer to 64
e1000e 0000:00:19.0: >Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
e1000e 0000:00:19.0: >irq 41 for MSI/MSI-X
[drm] Initialized drm 1.1.0 20060810
usb 1-3.2: >New USB device found, idVendor=050d, idProduct=3201
usb 1-3.2: >New USB device strings: Mfr=1, Product=3, SerialNumber=0
usb 1-3.2: >Product: Flip CC
usb 1-3.2: >Manufacturer: Belkin Corporation
[drm] radeon defaulting to kernel modesetting.
[drm] radeon kernel modesetting enabled.
[drm] initializing kernel modesetting (RV730 0x1002:0x9498 0x174B:0xE930).
[drm] register mmio base: 0xFDDE0000
[drm] register mmio size: 65536
ATOM BIOS: 11X
radeon 0000:01:00.0: >VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used)
radeon 0000:01:00.0: >GTT: 512M 0x0000000040000000 - 0x000000005FFFFFFF
[drm] Detected VRAM RAM=1024M, BAR=256M
[drm] RAM width 128bits DDR
[TTM] Zone kernel: Available graphics memory: 435636 kiB
[TTM] Zone highmem: Available graphics memory: 1551064 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
[drm] radeon: 1024M of VRAM memory ready
[drm] radeon: 512M of GTT memory ready.
[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[drm] Driver supports precise vblank timestamp query.
radeon 0000:01:00.0: >irq 42 for MSI/MSI-X
radeon 0000:01:00.0: >radeon: using MSI.
[drm] radeon: irq initialized.
[drm] GART: num cpu pages 131072, num gpu pages 131072
FDC 0 is a post-1991 82077
[drm] Loading RV730 Microcode
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
[drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
radeon 0000:01:00.0: >WB enabled
radeon 0000:01:00.0: >fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffc69c00
input: Belkin Corporation Flip CC as /devices/pci0000:00/0000:00:1a.7/usb1/1-3/1-3.2/1-3.2:1.0/input/input2
belkin 0003:050D:3201.0001: >input,hiddev0,hidraw0: USB HID v1.10 Device [Belkin Corporation Flip CC] on usb-0000:00:1a.7-3.2/input0
usb 1-3.4: >new low-speed USB device number 4 using ehci_hcd
[drm] ring test on 0 succeeded in 1 usecs
[drm] ib test on ring 0 succeeded in 0 usecs
[drm] Radeon Display Connectors
[drm] Connector 0:
[drm] HDMI-A-1
[drm] HPD2
[drm] DDC: 0x7f10 0x7f10 0x7f14 0x7f14 0x7f18 0x7f18 0x7f1c 0x7f1c
[drm] Encoders:
[drm] DFP2: INTERNAL_UNIPHY1
[drm] Connector 1:
[drm] VGA-1
[drm] DDC: 0x7e20 0x7e20 0x7e24 0x7e24 0x7e28 0x7e28 0x7e2c 0x7e2c
[drm] Encoders:
[drm] CRT2: INTERNAL_KLDSCP_DAC2
[drm] Connector 2:
[drm] DVI-I-1
[drm] HPD1
[drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
[drm] Encoders:
[drm] CRT1: INTERNAL_KLDSCP_DAC1
[drm] DFP1: INTERNAL_UNIPHY
[drm] Internal thermal controller with fan control
[drm] radeon: power management initialized
[drm] fb mappable at 0xD0142000
[drm] vram apper at 0xD0000000
[drm] size 5324800
[drm] fb depth is 24
[drm] pitch is 5888
fbcon: radeondrmfb (fb0) is primary device
Console: switching to colour frame buffer device 180x56
fb0: radeondrmfb frame buffer device
drm: registered panic notifier
[drm] Initialized radeon 2.18.0 20080528 for 0000:01:00.0 on minor 0
e1000e 0000:00:19.0: >eth0: (PCI Express:2.5GT/s:Width x1) 00:1d:09:79:e9:91
e1000e 0000:00:19.0: >eth0: Intel(R) PRO/10/100 Network Connection
e1000e 0000:00:19.0: >eth0: MAC: 7, PHY: 7, PBA No: FFFFFF-0FF
usb 1-3.4: >New USB device found, idVendor=1bcf, idProduct=05ca
usb 1-3.4: >New USB device strings: Mfr=0, Product=2, SerialNumber=0
usb 1-3.4: >Product: 2.4GHz 2way RF Receiver
input: 2.4GHz 2way RF Receiver as /devices/pci0000:00/0000:00:1a.7/usb1/1-3/1-3.4/1-3.4:1.0/input/input3
hid-generic 0003:1BCF:05CA.0002: >input,hidraw1: USB HID v1.00 Keyboard [2.4GHz 2way RF Receiver] on usb-0000:00:1a.7-3.4/input0
input: 2.4GHz 2way RF Receiver as /devices/pci0000:00/0000:00:1a.7/usb1/1-3/1-3.4/1-3.4:1.1/input/input4
hid-generic 0003:1BCF:05CA.0003: >input,hiddev0,hidraw2: USB HID v1.00 Mouse [2.4GHz 2way RF Receiver] on usb-0000:00:1a.7-3.4/input1
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
scsi 4:0:0:0: >Direct-Access TEAC USB HS-CF Card 4.08 PQ: 0 ANSI: 0
scsi 4:0:0:1: >Direct-Access TEAC USB HS-xD/SM 4.08 PQ: 0 ANSI: 0
scsi 4:0:0:2: >Direct-Access TEAC USB HS-MS Card 4.08 PQ: 0 ANSI: 0
scsi 4:0:0:3: >Direct-Access TEAC USB HS-SD Card 4.08 PQ: 0 ANSI: 0
sd 4:0:0:0: >Attached scsi generic sg2 type 0
sd 4:0:0:1: >Attached scsi generic sg3 type 0
sd 4:0:0:2: >Attached scsi generic sg4 type 0
sd 4:0:0:3: >Attached scsi generic sg5 type 0
sd 4:0:0:0: >[sdb] Attached SCSI removable disk
sd 4:0:0:1: >[sdc] Attached SCSI removable disk
sd 4:0:0:2: >[sdd] Attached SCSI removable disk
sd 4:0:0:3: >[sde] Attached SCSI removable disk
Adding 3142652k swap on /dev/sda5. Priority:-1 extents:1 across:3142652k
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
udevd[381]: starting version 175
lp: driver loaded but no devices found
EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
ACPI Warning: 0x00000460-0x0000047f SystemIO conflicts with Region \TCOI 1 (20120320/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting iTCO_wdt
ACPI Warning: 0x00000428-0x0000042f SystemIO conflicts with Region \PM2S 1 (20120320/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: 0x00000480-0x000004bf SystemIO conflicts with Region \GPO2 1 (20120320/utaddress-251)
ACPI Warning: 0x00000480-0x000004bf SystemIO conflicts with Region \GPO_ 2 (20120320/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
microcode: CPU0 sig=0x6fd, pf=0x1, revision=0xa1
dcdbas dcdbas: >Dell Systems Management Base Driver (version 5.6.0-3.2)
coretemp coretemp.0: >Using relative temperature scale!
coretemp coretemp.0: >Using relative temperature scale!
microcode: CPU1 sig=0x6fd, pf=0x1, revision=0xa1
microcode: Microcode Update Driver: v2.00 , Peter Oruba
snd_hda_intel 0000:00:1b.0: >irq 43 for MSI/MSI-X
init: failsafe main process (688) killed by TERM signal
input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5
input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
input: HDA Intel Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
input: HDA Intel Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
input: HDA Intel Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
input: HDA Intel Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
hda-intel: 0000:01:00.1: Handle VGA-switcheroo audio client
snd_hda_intel 0000:01:00.1: >irq 44 for MSI/MSI-X
input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input13
ppdev: user-space parallel port driver
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
e1000e 0000:00:19.0: >irq 41 for MSI/MSI-X
e1000e 0000:00:19.0: >irq 41 for MSI/MSI-X
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
init: alsa-restore main process (1095) terminated with status 99
e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx
e1000e 0000:00:19.0: >eth0: 10/100 speed: disabling TSO
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
usb 1-3.2: >USB disconnect, device number 3
usb 1-3.2: >new low-speed USB device number 5 using ehci_hcd
usb 1-3.2: >New USB device found, idVendor=050d, idProduct=0102
usb 1-3.2: >New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-3.2: >Product: Flip KVM
usb 1-3.2: >Manufacturer: Belkin Corporation
input: Belkin Corporation Flip KVM as /devices/pci0000:00/0000:00:1a.7/usb1/1-3/1-3.2/1-3.2:1.0/input/input14
hid-generic 0003:050D:0102.0004: >input,hidraw0: USB HID v1.10 Mouse [Belkin Corporation Flip KVM] on usb-0000:00:1a.7-3.2/input0
input: Belkin Corporation Flip KVM as /devices/pci0000:00/0000:00:1a.7/usb1/1-3/1-3.2/1-3.2:1.1/input/input15
hid-generic 0003:050D:0102.0005: >input,hidraw3: USB HID v1.10 Keyboard [Belkin Corporation Flip KVM] on usb-0000:00:1a.7-3.2/input1
usb 1-3.4: >USB disconnect, device number 4
SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
JFS: nTxBlock = 8192, nTxLock = 65536
NTFS driver 2.1.30 [Flags: R/O MODULE].
QNX4 filesystem 0.2.3 registered.
Btrfs loaded
usb 1-3.2: >USB disconnect, device number 5
usb 1-3.2: >new low-speed USB device number 6 using ehci_hcd
usb 1-3.2: >New USB device found, idVendor=050d, idProduct=3201
usb 1-3.2: >New USB device strings: Mfr=1, Product=3, SerialNumber=0
usb 1-3.2: >Product: Flip CC
usb 1-3.2: >Manufacturer: Belkin Corporation
input: Belkin Corporation Flip CC as /devices/pci0000:00/0000:00:1a.7/usb1/1-3/1-3.2/1-3.2:1.0/input/input16
belkin 0003:050D:3201.0006: >input,hiddev0,hidraw0: USB HID v1.10 Device [Belkin Corporation Flip CC] on usb-0000:00:1a.7-3.2/input0
usb 1-3.4: >new low-speed USB device number 7 using ehci_hcd
usb 1-3.4: >New USB device found, idVendor=1bcf, idProduct=05ca
usb 1-3.4: >New USB device strings: Mfr=0, Product=2, SerialNumber=0
usb 1-3.4: >Product: 2.4GHz 2way RF Receiver
input: 2.4GHz 2way RF Receiver as /devices/pci0000:00/0000:00:1a.7/usb1/1-3/1-3.4/1-3.4:1.0/input/input17
hid-generic 0003:1BCF:05CA.0007: >input,hidraw1: USB HID v1.00 Keyboard [2.4GHz 2way RF Receiver] on usb-0000:00:1a.7-3.4/input0
input: 2.4GHz 2way RF Receiver as /devices/pci0000:00/0000:00:1a.7/usb1/1-3/1-3.4/1-3.4:1.1/input/input18
hid-generic 0003:1BCF:05CA.0008: >input,hiddev0,hidraw2: USB HID v1.00 Mouse [2.4GHz 2way RF Receiver] on usb-0000:00:1a.7-3.4/input1
usb 1-3.4: >USB disconnect, device number 7
usb 1-3.2: >USB disconnect, device number 6
usb 1-3.2: >new low-speed USB device number 8 using ehci_hcd
usb 1-3.2: >New USB device found, idVendor=050d, idProduct=0102
usb 1-3.2: >New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-3.2: >Product: Flip KVM
usb 1-3.2: >Manufacturer: Belkin Corporation
input: Belkin Corporation Flip KVM as /devices/pci0000:00/0000:00:1a.7/usb1/1-3/1-3.2/1-3.2:1.0/input/input19
hid-generic 0003:050D:0102.0009: >input,hidraw0: USB HID v1.10 Mouse [Belkin Corporation Flip KVM] on usb-0000:00:1a.7-3.2/input0
input: Belkin Corporation Flip KVM as /devices/pci0000:00/0000:00:1a.7/usb1/1-3/1-3.2/1-3.2:1.1/input/input20
hid-generic 0003:050D:0102.000A: >input,hidraw1: USB HID v1.10 Keyboard [Belkin Corporation Flip KVM] on usb-0000:00:1a.7-3.2/input1
usb 1-3.2: >USB disconnect, device number 8
usb 1-3.2: >new low-speed USB device number 9 using ehci_hcd
usb 1-3.2: >New USB device found, idVendor=050d, idProduct=3201
usb 1-3.2: >New USB device strings: Mfr=1, Product=3, SerialNumber=0
usb 1-3.2: >Product: Flip CC
usb 1-3.2: >Manufacturer: Belkin Corporation
input: Belkin Corporation Flip CC as /devices/pci0000:00/0000:00:1a.7/usb1/1-3/1-3.2/1-3.2:1.0/input/input21
belkin 0003:050D:3201.000B: >input,hiddev0,hidraw0: USB HID v1.10 Device [Belkin Corporation Flip CC] on usb-0000:00:1a.7-3.2/input0
usb 1-3.2: >USB disconnect, device number 9
usb 1-3.2: >new low-speed USB device number 10 using ehci_hcd
usb 1-3.2: >New USB device found, idVendor=050d, idProduct=0102
usb 1-3.2: >New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-3.2: >Product: Flip KVM
usb 1-3.2: >Manufacturer: Belkin Corporation
input: Belkin Corporation Flip KVM as /devices/pci0000:00/0000:00:1a.7/usb1/1-3/1-3.2/1-3.2:1.0/input/input22
hid-generic 0003:050D:0102.000C: >input,hidraw0: USB HID v1.10 Mouse [Belkin Corporation Flip KVM] on usb-0000:00:1a.7-3.2/input0
input: Belkin Corporation Flip KVM as /devices/pci0000:00/0000:00:1a.7/usb1/1-3/1-3.2/1-3.2:1.1/input/input23
hid-generic 0003:050D:0102.000D: >input,hidraw1: USB HID v1.10 Keyboard [Belkin Corporation Flip KVM] on usb-0000:00:1a.7-3.2/input1
usb 1-3.2: >USB disconnect, device number 10
usb 1-3.2: >new low-speed USB device number 11 using ehci_hcd
usb 1-3.2: >New USB device found, idVendor=050d, idProduct=3201
usb 1-3.2: >New USB device strings: Mfr=1, Product=3, SerialNumber=0
usb 1-3.2: >Product: Flip CC
usb 1-3.2: >Manufacturer: Belkin Corporation
input: Belkin Corporation Flip CC as /devices/pci0000:00/0000:00:1a.7/usb1/1-3/1-3.2/1-3.2:1.0/input/input24
belkin 0003:050D:3201.000E: >input,hiddev0,hidraw0: USB HID v1.10 Device [Belkin Corporation Flip CC] on usb-0000:00:1a.7-3.2/input0
usb 1-3.4: >new low-speed USB device number 12 using ehci_hcd
usb 1-3.4: >New USB device found, idVendor=1bcf, idProduct=05ca
usb 1-3.4: >New USB device strings: Mfr=0, Product=2, SerialNumber=0
usb 1-3.4: >Product: 2.4GHz 2way RF Receiver
input: 2.4GHz 2way RF Receiver as /devices/pci0000:00/0000:00:1a.7/usb1/1-3/1-3.4/1-3.4:1.0/input/input25
hid-generic 0003:1BCF:05CA.000F: >input,hidraw1: USB HID v1.00 Keyboard [2.4GHz 2way RF Receiver] on usb-0000:00:1a.7-3.4/input0
input: 2.4GHz 2way RF Receiver as /devices/pci0000:00/0000:00:1a.7/usb1/1-3/1-3.4/1-3.4:1.1/input/input26
hid-generic 0003:1BCF:05CA.0010: >input,hiddev0,hidraw2: USB HID v1.00 Mouse [2.4GHz 2way RF Receiver] on usb-0000:00:1a.7-3.4/input1
usb 1-3.2: >USB disconnect, device number 11
usb 1-3.2: >new low-speed USB device number 13 using ehci_hcd
usb 1-3.2: >New USB device found, idVendor=050d, idProduct=0102
usb 1-3.2: >New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-3.2: >Product: Flip KVM
usb 1-3.2: >Manufacturer: Belkin Corporation
input: Belkin Corporation Flip KVM as /devices/pci0000:00/0000:00:1a.7/usb1/1-3/1-3.2/1-3.2:1.0/input/input27
hid-generic 0003:050D:0102.0011: >input,hidraw0: USB HID v1.10 Mouse [Belkin Corporation Flip KVM] on usb-0000:00:1a.7-3.2/input0
input: Belkin Corporation Flip KVM as /devices/pci0000:00/0000:00:1a.7/usb1/1-3/1-3.2/1-3.2:1.1/input/input28
hid-generic 0003:050D:0102.0012: >input,hidraw3: USB HID v1.10 Keyboard [Belkin Corporation Flip KVM] on usb-0000:00:1a.7-3.2/input1
usb 1-3.4: >USB disconnect, device number 12
usb 1-3.2: >USB disconnect, device number 13
usb 1-3.2: >new low-speed USB device number 14 using ehci_hcd
usb 1-3.2: >New USB device found, idVendor=050d, idProduct=3201
usb 1-3.2: >New USB device strings: Mfr=1, Product=3, SerialNumber=0
usb 1-3.2: >Product: Flip CC
usb 1-3.2: >Manufacturer: Belkin Corporation
input: Belkin Corporation Flip CC as /devices/pci0000:00/0000:00:1a.7/usb1/1-3/1-3.2/1-3.2:1.0/input/input29
belkin 0003:050D:3201.0013: >input,hiddev0,hidraw0: USB HID v1.10 Device [Belkin Corporation Flip CC] on usb-0000:00:1a.7-3.2/input0
usb 1-3.2: >USB disconnect, device number 14
usb 1-3.2: >new low-speed USB device number 15 using ehci_hcd
usb 1-3.2: >New USB device found, idVendor=050d, idProduct=0102
usb 1-3.2: >New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-3.2: >Product: Flip KVM
usb 1-3.2: >Manufacturer: Belkin Corporation
input: Belkin Corporation Flip KVM as /devices/pci0000:00/0000:00:1a.7/usb1/1-3/1-3.2/1-3.2:1.0/input/input30
hid-generic 0003:050D:0102.0014: >input,hidraw0: USB HID v1.10 Mouse [Belkin Corporation Flip KVM] on usb-0000:00:1a.7-3.2/input0
input: Belkin Corporation Flip KVM as /devices/pci0000:00/0000:00:1a.7/usb1/1-3/1-3.2/1-3.2:1.1/input/input31
hid-generic 0003:050D:0102.0015: >input,hidraw1: USB HID v1.10 Keyboard [Belkin Corporation Flip KVM] on usb-0000:00:1a.7-3.2/input1
usb 1-3.2: >USB disconnect, device number 15
usb 1-3.2: >new low-speed USB device number 16 using ehci_hcd
usb 1-3.2: >New USB device found, idVendor=050d, idProduct=3201
usb 1-3.2: >New USB device strings: Mfr=1, Product=3, SerialNumber=0
usb 1-3.2: >Product: Flip CC
usb 1-3.2: >Manufacturer: Belkin Corporation
input: Belkin Corporation Flip CC as /devices/pci0000:00/0000:00:1a.7/usb1/1-3/1-3.2/1-3.2:1.0/input/input32
belkin 0003:050D:3201.0016: >input,hiddev0,hidraw0: USB HID v1.10 Device [Belkin Corporation Flip CC] on usb-0000:00:1a.7-3.2/input0
usb 1-3.2: >USB disconnect, device number 16
usb 1-3.2: >new low-speed USB device number 17 using ehci_hcd
usb 1-3.2: >New USB device found, idVendor=050d, idProduct=0102
usb 1-3.2: >New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-3.2: >Product: Flip KVM
usb 1-3.2: >Manufacturer: Belkin Corporation
input: Belkin Corporation Flip KVM as /devices/pci0000:00/0000:00:1a.7/usb1/1-3/1-3.2/1-3.2:1.0/input/input33
hid-generic 0003:050D:0102.0017: >input,hidraw0: USB HID v1.10 Mouse [Belkin Corporation Flip KVM] on usb-0000:00:1a.7-3.2/input0
input: Belkin Corporation Flip KVM as /devices/pci0000:00/0000:00:1a.7/usb1/1-3/1-3.2/1-3.2:1.1/input/input34
hid-generic 0003:050D:0102.0018: >input,hidraw1: USB HID v1.10 Keyboard [Belkin Corporation Flip KVM] on usb-0000:00:1a.7-3.2/input1
usb 1-3.2: >USB disconnect, device number 17
usb 1-3.2: >new low-speed USB device number 18 using ehci_hcd
usb 1-3.2: >New USB device found, idVendor=050d, idProduct=3201
usb 1-3.2: >New USB device strings: Mfr=1, Product=3, SerialNumber=0
usb 1-3.2: >Product: Flip CC
usb 1-3.2: >Manufacturer: Belkin Corporation
input: Belkin Corporation Flip CC as /devices/pci0000:00/0000:00:1a.7/usb1/1-3/1-3.2/1-3.2:1.0/input/input35
belkin 0003:050D:3201.0019: >input,hiddev0,hidraw0: USB HID v1.10 Device [Belkin Corporation Flip CC] on usb-0000:00:1a.7-3.2/input0
usb 1-3.2: >USB disconnect, device number 18
usb 1-3.2: >new low-speed USB device number 19 using ehci_hcd
usb 1-3.2: >New USB device found, idVendor=050d, idProduct=0102
usb 1-3.2: >New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-3.2: >Product: Flip KVM
usb 1-3.2: >Manufacturer: Belkin Corporation
input: Belkin Corporation Flip KVM as /devices/pci0000:00/0000:00:1a.7/usb1/1-3/1-3.2/1-3.2:1.0/input/input36
hid-generic 0003:050D:0102.001A: >input,hidraw0: USB HID v1.10 Mouse [Belkin Corporation Flip KVM] on usb-0000:00:1a.7-3.2/input0
input: Belkin Corporation Flip KVM as /devices/pci0000:00/0000:00:1a.7/usb1/1-3/1-3.2/1-3.2:1.1/input/input37
hid-generic 0003:050D:0102.001B: >input,hidraw1: USB HID v1.10 Keyboard [Belkin Corporation Flip KVM] on usb-0000:00:1a.7-3.2/input1
e1000e: eth0 NIC Link is Down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
usb 7-2: >new low-speed USB device number 2 using uhci_hcd
usb 7-2: >New USB device found, idVendor=1bcf, idProduct=05ca
usb 7-2: >New USB device strings: Mfr=0, Product=2, SerialNumber=0
usb 7-2: >Product: 2.4GHz 2way RF Receiver
input: 2.4GHz 2way RF Receiver as /devices/pci0000:00/0000:00:1d.1/usb7/7-2/7-2:1.0/input/input38
hid-generic 0003:1BCF:05CA.001C: >input,hidraw2: USB HID v1.00 Keyboard [2.4GHz 2way RF Receiver] on usb-0000:00:1d.1-2/input0
input: 2.4GHz 2way RF Receiver as /devices/pci0000:00/0000:00:1d.1/usb7/7-2/7-2:1.1/input/input39
hid-generic 0003:1BCF:05CA.001D: >input,hiddev0,hidraw3: USB HID v1.00 Mouse [2.4GHz 2way RF Receiver] on usb-0000:00:1d.1-2/input1
usb 7-2: >USB disconnect, device number 2
usb 1-3.2: >USB disconnect, device number 19
usb 1-3.2: >new low-speed USB device number 20 using ehci_hcd
usb 1-3.2: >New USB device found, idVendor=050d, idProduct=3201
usb 1-3.2: >New USB device strings: Mfr=1, Product=3, SerialNumber=0
usb 1-3.2: >Product: Flip CC
usb 1-3.2: >Manufacturer: Belkin Corporation
input: Belkin Corporation Flip CC as /devices/pci0000:00/0000:00:1a.7/usb1/1-3/1-3.2/1-3.2:1.0/input/input40
belkin 0003:050D:3201.001E: >input,hiddev0,hidraw0: USB HID v1.10 Device [Belkin Corporation Flip CC] on usb-0000:00:1a.7-3.2/input0
usb 1-3.3: >new low-speed USB device number 21 using ehci_hcd
usb 1-3.3: >New USB device found, idVendor=1bcf, idProduct=05ca
usb 1-3.3: >New USB device strings: Mfr=0, Product=2, SerialNumber=0
usb 1-3.3: >Product: 2.4GHz 2way RF Receiver
input: 2.4GHz 2way RF Receiver as /devices/pci0000:00/0000:00:1a.7/usb1/1-3/1-3.3/1-3.3:1.0/input/input41
hid-generic 0003:1BCF:05CA.001F: >input,hidraw1: USB HID v1.00 Keyboard [2.4GHz 2way RF Receiver] on usb-0000:00:1a.7-3.3/input0
input: 2.4GHz 2way RF Receiver as /devices/pci0000:00/0000:00:1a.7/usb1/1-3/1-3.3/1-3.3:1.1/input/input42
hid-generic 0003:1BCF:05CA.0020: >input,hiddev0,hidraw2: USB HID v1.00 Mouse [2.4GHz 2way RF Receiver] on usb-0000:00:1a.7-3.3/input1
e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx
e1000e 0000:00:19.0: >eth0: 10/100 speed: disabling TSO
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
usb 1-3.2: >USB disconnect, device number 20
usb 1-3.2: >new low-speed USB device number 22 using ehci_hcd
usb 1-3.2: >New USB device found, idVendor=050d, idProduct=0102
usb 1-3.2: >New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-3.2: >Product: Flip KVM
usb 1-3.2: >Manufacturer: Belkin Corporation
input: Belkin Corporation Flip KVM as /devices/pci0000:00/0000:00:1a.7/usb1/1-3/1-3.2/1-3.2:1.0/input/input43
hid-generic 0003:050D:0102.0021: >input,hidraw0: USB HID v1.10 Mouse [Belkin Corporation Flip KVM] on usb-0000:00:1a.7-3.2/input0
input: Belkin Corporation Flip KVM as /devices/pci0000:00/0000:00:1a.7/usb1/1-3/1-3.2/1-3.2:1.1/input/input44
hid-generic 0003:050D:0102.0022: >input,hidraw3: USB HID v1.10 Keyboard [Belkin Corporation Flip KVM] on usb-0000:00:1a.7-3.2/input1
usb 1-3.3: >USB disconnect, device number 21